Boosting Efficiency: NEOLITE ZKW's Success with Huarong's Injection Molding Machine

In the highly competitive automotive lighting market, manufacturing precision and efficiency are critical for maintaining a competitive edge. NEOLITE ZKW, one of India’s largest automotive lighting OEMs, sought a solution to overcome production challenges, particularly related to the complex injection molding materials used in their lamp housings. After implementing Huarong’s BMC injection molding machine, NEOLITE ZKW experienced remarkable improvements in both production stability and efficiency, making their investment in high-performance machinery a crucial factor in their ongoing success.

NEOLITE ZKW, a division of the NEOLITE GROUP, has been at the forefront of automotive lighting production for over 70 years. Located in Delhi, India, the company is one of the largest automotive lighting OEMs, serving over 40 automotive brands globally. As a key player in the industry, NEOLITE ZKW exports products to over 70 countries, making it India’s largest exporter of automotive lighting. However, even industry leaders encounter production challenges that require innovative solutions.

Further reading: Injection Molding Machine: Key to Precision Manufacturing of Automotive Parts

Producing automotive lamp housings involves working with complex composite materials, including unsaturated polyester resin, epoxy resin, glass fibers, and other additives that ensure the products meet high insulation and temperature resistance standards. These materials placed a heavy strain on NEOLITE ZKW’s production equipment, leading to critical issues:

Impact on Production Efficiency

The BMC materials used by NEOLITE ZKW were tough on the material cylinders of their existing injection molding machines, leading to frequent malfunctions and downtime. This not only slowed production but also affected overall product quality and consistency. The primary challenges included:

• Material Cylinder Durability: The combination of glass fibers and resins severely impacted the durability of the machine’s material cylinder, causing frequent breakdowns.
• Inconsistent Product Quality: Machine instability directly affected product precision, leading to higher defect rates and compromised quality control.
• Production Downtime: Each material cylinder malfunction resulted in halted production, reducing efficiency and delaying deliveries.

NEOLITE ZKW needed a machine that could withstand the rigors of BMC materials while maintaining high production efficiency and product quality.

To address these challenges, NEOLITE ZKW invested in Huarong’s HMC series horizontal injection molding machine, specifically designed for processing BMC (Bulk Molding Compound) materials. The machine’s advanced features proved critical in solving their production issues.

Key Features of the Huarong Machine

Huarong’s machine provided several innovative features that ensured better performance and reliability for NEOLITE ZKW:

1. Dual Alloy Screw: The machine is equipped with a dual alloy material cylinder, enhancing wear resistance when processing thermosetting plastics like BMC. This upgrade significantly reduced material cylinder wear and tear, lowering the risk of downtime.
2. Patented BMC Feeding System: This system offers independent feeding, ejection, and material loading, improving both speed and stability in production. It ensures the smooth processing of BMC materials without clogging or delays.
3. ACC Accumulator System (Optional): The ACC system uses nitrogen gas pressure to accelerate hydraulic operations, reduces overall molding time, and contributes to shorter production cycles and enhanced efficiency.

These features enabled NEOLITE ZKW to overcome the durability and efficiency challenges posed by their materials, improving production processes across the board.

Related product: HMC Injection Molding Machine

Since the integration of Huarong’s HMC series machine, NEOLITE ZKW has reported significant improvements in the injection molding field in several key areas of their production:

Improved Product Precision

One of the most immediate benefits was the enhancement of product precision. The advanced features of Huarong’s machine minimized the variations that previously affected the quality of the lamp housings. As a result, the client saw a reduction in defective products and an increase in overall quality.

Reduced Defect Rate

With the improved precision, NEOLITE ZKW significantly lowered its defect rate. The decrease in defective units not only reduced waste but also improved overall production efficiency and cost management.

Enhanced Production Efficiency

By reducing the frequency of machine malfunctions and minimizing downtime, NEOLITE ZKW experienced a marked increase in production speed. The company was able to maintain a more consistent output without sacrificing quality, ultimately leading to shorter lead times and better customer satisfaction.

Cost Savings and Improved Competitiveness

The combination of reduced defects and enhanced efficiency led to significant cost savings for NEOLITE ZKW. These savings allowed the company to allocate resources to other areas of its injection molding business, strengthening its competitive position in the global automotive lighting market.

Further reading: Success Stories: How Elevate South African Manufacturer's Manufacturing Capabilities with Two-platen

Huarong's BMC injection molding machine provided NEOLITE ZKW with a highly reliable solution to their production challenges. By improving machine stability and enhancing production efficiency, NEOLITE ZKW was able to overcome long-standing issues, ultimately improving its ability to meet the increasing demand for high-quality automotive lighting products.

For manufacturers facing similar production challenges, investing in advanced machinery like Huarong's injection molding equipment can provide a critical advantage in maintaining high standards of precision and efficiency.

Ready to transform your production line with Huarong's reliable injection molding machines? Contact us today to learn more about how our solutions can help your business grow.

• Group Name: Huarong Group
• Brand: Huarong, Yuhdak, Nanrong
• Service Offerings: Injection Molding Machine, Vertical Injection Molding Machine, Injection Molding Automation
• Tel: +886-6-7956777
• Address: No.21-6, Zhongzhou, Chin An Vil., Xigang Dist., Tainan City 72351, Taiwan
• Official Website: https://www.huarong.com.tw/

Feel free to contact us.

Previous news: Huarong's Success at TaipeiPLAS 2024: A Step Toward Sustainable Innovation